ALLEN & HEATH iLIVE Guia do Utilizador descarregar pdf (Página 18)

M-WAVES AUDIO INTERFACE

4. WORKING WITH TWO M-WAVES CARDS

You can use M-Waves V1 and V2 Cards in the same setup. The only limitation is that a rst-generation M-Waves card, an M-Waves V1,

cannot be an Ethernet clock (SoE) slave. It must provide clock sync to a second-generation card, an M-waves V2. Setting up the clock

master for the network is done in either MultiRack SoundGrid or SoundGrid Studio applications.

In the Waves SoundGrid Inventory window, assign the two M-Waves cards to 1 and 2 consecutively. Select the one you want to be

the master under the Master column.

To synchronize the two M-Waves cards, choose one of the following two options:

1. If you want the iLive system to be the source (Internal):

(a) On the iLive system, set Audio Clock Source to Internal.

(b) In the SoundGrid Inventory window, click on the Settings for the

M-Waves V2 card assigned to 1, and set it to Digital.

It will be set automatically as Slave and the source will automatically

be synced over Ethernet.

1 2 ... 13 14 15 16 17 18 19

Sem comentários

ALLEN & HEATH iLIVE Guia do Utilizador Página 18